Friday, 22 March 2019

The Hollow Knight Papercraft

The Hollow Knight

Difficulty: Medium
Pages: 9
Pieces: 117
Height: 38cm
Width: 28cm
Depth: 48cm

Download

WARNING! 
Ironically, this thing is somewhat of a failure. It is barely able to stand and I'm afraid that it might crumble upon its own weight one day. It is buildable though and "should" be possible to balance out. Just requires some effort. If you still decide to give it a go, I recommend trying strengthening nail by gluing something sturdy inside (I've used actual nail) and gluing a wire and (maybe) some additional weight inside "cape". Good luck ~

Instructions: Print page 11 at the back of page 4. Build head starting from the tips of the horns and going down, close at "mouth". Build legs from top and down and arm from fingertips and up. Build body starting from bottom and going up, attach limbs when possible. Cloak is built from narrowest to widest part. Assemble head, cloak and body first. Then attach nail and "cape" (pages 9-10 part), try to find good enough position for them to prevent model from falling. Again, good luck ~

8 comments:

  1. no mind to think

    ReplyDelete
  2. Would you be able to re-scale just the head so I could make a mask for my other son?

    ReplyDelete
    Replies
    1. https://www.mediafire.com/file/uqu8nkobedr2wgk/TheHollowKnightHead.pdo/file
      Link to just the head, rescale however you want ~
      To rescale open with Pepakura Designer (not Viewer), 2D Menu > Change Scale > Set Scale

      Delete
    2. Thank you so much! My kids love them!!

      https://photos.app.goo.gl/ddBCENzcQpAhZCCA6

      Delete
  3. can you make a tutorial on making the model

    ReplyDelete
  4. Will you make the pail king?

    ReplyDelete
  5. I cant open it

    ReplyDelete