Winged Nosk (Hollow Knight Papercraft)

Difficulty: Hard
Pages: 4
Pieces: 110
Height: 20cm
Width: 19cm
Depth: 18cm

 Download

Instructions:  Print page 6 at the back of page 2. Body is built starting from tip of the tail and closing at neck . Make legs separately and attach them when possible. When making wings glue corresponding flaps together outside and glue membrane on top of them (check picture below), attach to the main body when possible. When making body first make spike, then make corresponding ribs, then glue them together and attach whole thing to the rest of the body and then attach part of orange belly. There are some alterations to the process (legs, spike with two pair of corresponding ribs), refer to .pdo while building. Head is made starting from the top and closed at the tips of the horns (mandibles?). Enjoy your Doppelgänger Spiderbat ~

Elderbug (Hollow Knight Papercraft)

Difficulty: Medium
Pages: 2
Pieces: 52
Height: 10cm
Width: 8cm
Depth: 8cm

Download

Instructions: Print page 4 at the back of page 3. Head is built starting from the tips of the horns, body starts from bottom and the rest is made in whatever order ~

Charms Part 6 (Hollow Knight Papercraft)

Fury of the Fallen
Difficulty: Medium
Pages: 1/2
Pieces: 8
Height: 3cm
Width: 3cm
Depth: 0.5cm

Longnail
Difficulty: Medium
Pages: 1/2
Pieces: 14
Height: 3cm
Width: 3cm
Depth: 0.5cm

Nailmaster's Glory
Difficulty: Medium
Pages: 1/2
Pieces: 16
Height: 3cm
Width: 3cm
Depth: 0.5cm

Sharp Shadow
Difficulty: Easy
Pages: 1/2
Pieces: 9
Height: 3cm
Width: 3cm
Depth: 0.5cm

Thorns of Agony
Difficulty: Medium
Pages: 1/2
Pieces: 11
Height: 3cm
Width: 3cm
Depth: 0.5cm

Download

Myla (Hollow Knight Papercraft)

Difficulty: Easy
Pages: 1
Pieces: 26
Height: 7.5cm
Width: 8.5cm
Depth: 8.5cm

Download 

Instructions: 
Step 1: Make body starting from the top of the hat. 
Step 2: Make everything else and put everything together ~ 

Notes: Whoever asked me to make Myla, your wish is granted ~

Charms Part 5 (Hollow Knight Papercraft)

Joni's Blessing
Difficulty: Hard
Pages: 1/2
Pieces: 29
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Lifeblood Core
Difficulty: Medium
Pages: 1/2
Pieces: 12
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Lifeblood Heart
Difficulty: Medium
Pages: 1/2
Pieces: 11
Height: 3cm
Width: 3cm
Depth: ~0.8cm

Unbreakable Heart
Difficulty: Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Hiveblood
Difficulty: Easy
Pages: 1/2
Pieces: 3
Height: 3cm
Width: 2.6cm
Depth: 0.5cm

Download

Instructions:
Shared: Every charm takes less than half of a page, so you can print two on the same page.
Hiveblood: Fold lines and flaps that match comb outlines.
Joni's Blessing: Build order: Base. Masks on left and right. Ornamental metallic piece with gems on bottom part. Central Mask.
Lifeblood Core: Base. Ornamental metallic piece. Side gems. Center gem.
Lifeblood Heart: Base. Lower ornamental metallic part. Gem. Top ornamental metallic part.
Unbreakable Heart: Base. Masks in pretty much any order.

Shade Lord (Hollow Knight Papercraft)

Difficulty: Hard
Pages: 17
Pieces: 445
Height: 40cm
Width: 46cm
Depth: 32cm

Download

Instructions: Now it comes with an illustrated guide inside. I'm wonderning, if it's more comprehensible than my usual gibberish ~
Notes: The moment of finally witnessing that glory... The sweetest moment of them all ~

Charms Part 4 (Hollow Knight Papercraft)

Baldur Shell
Difficulty: Medium
Pages: 1/2
Pieces: 18
Height: 3cm
Width: 3cm
Depth: 0.5cm

Deep Focus
Difficulty: Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: 0.6cm

Quick Focus
Difficulty: Easy
Pages: 1/2
Pieces: 8
Height: 3cm
Width: 3cm
Depth: 0.6cm

Spore Shroom
Difficulty: Medium
Pages: 1/2
Pieces: 9
Height: 3cm
Width: 3cm
Depth: 0.5cm

Shape of Unn
Difficulty: Easy
Pages: 1/2
Pieces: 11
Height: 3cm
Width: 3cm
Depth: 0.5cm

Download 

Instructions:
Shared: If there is page 2, print it at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page.
Baldur Shell: Make shell parts and attach them one by one to the backpiece.
Deep Focus: Made going from top to down, from left to right. Use.pdo file.
Quick Focus: Make base. Make crystal and glue it in place. Cut out remaining pieces and glue them by black parts to the back of the base.
Spore Shroom: Make center part. Make shrooms and attach them one by ne to the center piece. Finish with backside
Shape of Unn: Make base. Cut out and glue ornaments in place.

Mini Quirrel (Hollow Knight Papercaft)

Difficulty: Medium
Pages: 1
Pieces: 29
Height: 10cm
Width: 6cm
Depth: 8cm

Download

Instructions: Make body starting from face and then going down. Make remaining parts. Put everything together ~

Mini Hornet (Hollow Knight Papercraft)

Difficulty: Medium
Pages: 1
Pieces: 43
Height: ~10cm
Width: ~8cm
Depth: ~7cm

Download

Instructions: Print page 2 at the back of page 1. Head is made starting from tips of the horns, closing at "mouth". Body is made starting from feet, closing at neck. Two flaps on neck part should be left outside model, glue arms on top of them. Cloak is made by making first all 8 sectors of it and then attaching them together. Finish cloak with collar parts. Make needle. Assemble all parts together: first slide cloak on top of the body, then glue head to the neck; find desirable position to cloak and fix it in place by gluing it to body; glue needle to the arm.

Mini Knight (Hollow Knight Papercraft)

Difficulty: Hard
Pages: 1
Pieces: 33
Height: 7cm
Width: 3.5cm
Depth: ~3cm

Download

Instructions: Head is made starting from tips of the horns, closed at the bottom. Body is made starting from feet, closing at top. Cloak is made starting from rightmost part and going clockwise.

Charms Part 3 (Hollow Knight Papercraft)

Dream Wielder
Difficulty: Easy
Pages: 1/2
Pieces: 4
Height: 3cm
Width: 3cm
Depth: ~0.4cm

Flukenest
Difficulty: Hard
Pages: 1/2
Pieces: 7
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Soul Eater
Difficulty: Hard
Pages: 1/2
Pieces: 22
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Spell Twister
Difficulty: Hard
Pages: 1/2
Pieces: 13
Height: 3cm
Width: ~3cm
Depth: ~0.7cm

Shaman Stone
Difficulty: Hard
Pages: 1/2
Pieces: 17
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Shaman Stone (easy)
Difficulty: Easy
Pages: 1/2
Pieces: 5
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Download

Instructions:
Shared: If there is page 2, print it at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page.
Dream Wielder: I was unable to came up with a way to overcomplicate this thing.
Flukenest: Start with small black part.
Soul Eater: Make base sarting from golden ring, then attach "scales".
Spell Twister: Make base and gem. Cut out "wings" and attach them to the gem, then attach whole thing to the base. Finish with making remaining "claw" parts and putting them in place.
Shaman Stone: There are two versions: hard and easy. Comparison is shown below (easy one is on the right).

Radiance (Hollow Knight Papercraft)

Radiance

Difficulty: Hard
Pages: 6
Pieces: 193
Height: 30cm
Width: 29cm
Depth: 6.5cm

Base

Difficulty: Easy
Pages: 5
Pieces: 46
Height: 33cm
Width: ~42cm
Depth:  6cm

Download

Instructions: Start building from the crown and keep following numbers. Build face section (parts 17-20) separately and then attach whole thing to the rest of the head. Glue corresponding flaps on parts 28 and 29, 30-31 and 19-27, 32 and 33 together outside of the model. Glue fluff parts (34,35,36) on top of them. Legs are the hardest part of the model, be careful with them. Prefold all flaps on black leg parts (41,44,45,62,65,66). Tentac... I mean. wings are relatively easy to build, though connecting individual tenta... feathers together might be tricky. Parts 88, 142,143 and 193 are optional, if you think they will make putting everything together easier, go for it. When main model is made you can either just hang it by middle crown spike or build base provided. Start building each pillar from top going down. Place coin inside base of each pillar.

Notes: Somehow this Godly Moth managed to corrupt its own .pdo file, so I had to redo everything from scratch. These things are way too self aware sometimes ~

Nosk (Holow Knight Papercraft)

Nosk

Difficulty: Hard
Pages: 4
Pieces: 145
Height: 20cm
Width: 17cm
Depth:  26cm

Download

Instructions: Print page 6 at the back of page 4. Follow numbers. Body is built starting from tip of the tail (part 1) and closing at neck (128). Make legs separately and attach them when possible. When making body first make spike, then make corresponding ribs, then glue them together and attach whole thing to the rest of the body and then attach part of orange belly. There are some alterations to the process (legs, spike with two pair of corresponding ribs), refer to .pdo while building. Head is made starting from tips of the horns (mandibles?) and closed at part 143. Enjoy your Doppelgänger Spider ~

Hatchling (Hollow Knight Papercraft)

Hatchling

Difficulty: Easy
Pages: 1
Pieces: 28
Height: 7.5cm
Width: 11.5cm
Depth: 9.5cm

Download

Instructions: Head is built starting from the tips of the horns, closing at the bottom of the mask. Everything else should be pretty obvious ~

Weaverlings x3 (Hollow Knight Papercraft)

Weaverlings x3

Difficulty: Easy
Pages: 1
Pieces: 27 (9x3)
Height: 3cm + legs each
Width: 3cm + legs each
Depth:  3cm + legs each

Download 

Instructions: Print page 3 on back of page 2. They are literally spheres on legs. Start with parts that have eyes, close with part that has no flaps. Cut out and fold legs the way you like, attach them to the body. Done ~

Grimmchild (Hollow Knight papercraft)

Grimmchild

Difficulty: Easy
Pages: 2
Pieces: 30
Height: 6cm
Width: 15cm
Depth:  15cm

Download 

Instructions: Pretty easy one. Make wings. Make head starting at tips of the horns and closing at mouth. Make body starting at tip of the tail and closing at neck. Put everything together ~

Charms Part 2 (Hollow Knight Papercraft)

Gathering Swarm
Difficulty: Hard
Pages: 1/2
Pieces: 32
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Glowing Womb
Difficulty: Easy
Pages: 1/2
Pieces: 22
Height: 3cm
Width: 3cm
Depth: ~0.8cm

Grimmchild
Difficulty: Medium
Pages: 1/2
Pieces: 14
Height: 3cm
Width: 2.5cm
Depth:  ~0.5cm

Wayward Compass
Difficulty: Medium
Pages: 1/2
Pieces: 11
Height: 3cm
Width: 3cm
Depth: ~0.7cm


Weaversong
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 14
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Weaversong (easy)
Difficulty: Easy
Pages: 1/2
Pieces: 5
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Download 

Instructions:
Shared: If there is page 2, print it at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page.
Gathering Swarm: Make base. Attach reddish parts going from bottom to top, use markings at base as guide. Shell part is made starting from small center piece and going outwards. When making fly, you can slightly fold wings and body to add some volume. Glue wings to body, the glue the whole fly to the base.
Glowing Womb: Make base. Attach "feathers" going from bottom to top ones. Make mask starting from top and going down. Slide mask on top on the base and glue it in place.
Grimmchild: Start from tips of the horns and go down. Close with the backside piece.
Wayward Compass: Prefold lines on star shaped part.
Weaversong: There are two versions: normal and easy. Easy one is just a semisphere, normal one has a crease in it and webs as separate details. Here is a comparison (easy one is on the right).

Primal Aspid (Hollow Knight papercraft)

Primal Aspid

Difficulty: Medium
Pages: 1
Pieces: 27 (+4 for base)
Height: 9cm
Width: 10cm
Depth: 5cm

Download

Instructions: Print page 3 at the back of page 2. Follow numbers. Head is the hardest part, everything else is pretty easy. Place a small coin inside base.

Charms part 1 (Hollow Knight Papercraft)

Void Heart
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Quick Slash
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 15
Height: ~3cm
Width: ~3cm
Depth: ~0.7cm


Soul Catcher
Difficulty: Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Mark of Pride
Difficulty: Medium-Hard
Pages: 1/2
Pieces: 13
Height: 3cm
Width: ~3cm
Depth: ~0.7cm

Unbreakable Strength
Difficulty: Hard
Pages: 1/2
Pieces: 21
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Download 


Instructions:
Shared: Print page 2 at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page. They all are prety straightforward, just follow numbers. All difficulty comes from their small size.
Void Heart: You can cut out eyeholes for a nice depth effect.
Quick Slash: Make base first, then attach "blades" layer by layer. Use image inside as reference. Easiest to build, but also easiest to mess up, so be careful.
Mark of Pride: Prefold all flaps with valley fold.
Unbreakable Strength: Prefold all flaps. Attach "claws" to the base by gluing them to the backside by black side of flaps. Backside should look like this (minus black color):

Notes: My standard charm build ~
Also, funny coincidence, that three out of five charms are made of exactly 13 pieces ~

Troupe Master Grimm Papercraft (Hollow Knight)

Troupe Master Grimm

Difficulty: Medium
Pages: 2 (+3 for base)
Pieces: 30 (+14 for base)
Height: 21cm
Width: 17cm
Depth:  17cm

Download

Instructions: Print page 7 at the back of the page 3. Model is pretty straightforward, just follow numbers. When three main parts (head, body, cloak) are done, first put cloak on body without gluing it to anything yet. Then glue head to the body. Find good position for cloak and glue it in 1-2 places to head.
To build base attach pieces A and B together, then glue inner flame circle parts (C) to the flaps of part B. Glue parts D on top of parts C. Carefully cut out all flames. You can place part E inside base for some additional support. Close base with part F.

Notes: Probably, one of the best dance partners I've ever had ~