Wind-up Garuda (Final Fantasy XIV Papercraft)

 

 

Difficulty: Hard
Pages: 3/5
Pieces: 102
Height: 14cm/24cm
Width: 7cm/12cm
Depth: 6cm/10cm

Download

 Disclaimer: I didn't make this model, it was ripped from the game. I've just posed it and edited it a little bit to make it more papercraft friendly ~

 Instructions: Head: Front part from top to bottom, make and attach eyelashes and all the fancy feathers (except for the big flat white ones on the cheeks), back part from top to bottom, closing at small square part. Body: Starts at neck, closes at feet; make hands starting from tips of the claws and attach when possible. Wing are made from base to tips. Finally, put everything together. With right wing positioning she can stand on her own~

 

Wind-up Estinien (Final Fantasy XIV Papercraft)

 

Difficulty: Medium (19cm)/ Hard (11cm)
Pages: 7/3
Pieces: 139
Height: 19cm/11cm
Width: 18.5cm/10.5cm
Depth: 31cm/18.cm

Download 

 Disclaimer: I didn't make this model, it was ripped from the game. I've just posed it and edited it a little bit to make it more papercraft friendly ~

 Instructions: It's pretty standard, really. Start with tips of the horns, close at feet. Make and attach all of the spikes either while building main body or after finishing it. Can stand on its own if spear is positioned properly.

Notes: Estinien is a bro. Even if I've betrayed our broship by trading my spear for a rapier ~

Some things never change, though ~

*backflips into abyss*

Wind-up Ifrit (Final Fantasy XIV Papercraft)

 

Difficulty: Medium (16cm)/ Hard (8cm)
Pages: 4/2
Pieces: 106
Height: 16/8cm
Width: 13/6.5cm
Depth: 19/9cm

Download

Disclaimer: I didn't make this model, it was ripped from the game. I've just posed it and edited it a little bit to make it more papercraft friendly ~

 Instructions: I am tired of words. So take this crudely drawn scheme instead ~

Wind-up Mystel (Final Fantasy XIV Papercraft)

Difficulty: Hard (18cm)/ Savage (10cm)
Pages: 4/2
Pieces: 143
Height: 18cm/10cm
Width: 11.5cm/6cm
Depth:  7cm/4cm

Download 

Disclaimer: I didn't make this model, it was ripped from the game. I've just posed it and edited it a little bit to make it more papercraft friendly ~

 Instructions: Go for smaller version only if you are masochist and/or want challenge or if you are ready to suffer for cute smollnes. Starts with the front of the hair, attach ears when possible, make face, finish back of the hair, make neck, don't forget crystal on the cheeck, make torso, attach hands when possible, make legs and glue them to main body. When making hood flap on the front should be glued in place only after you've sled hood on the neck. Base is made starting from bottom piece, continued by making all crystal spikes starting from leftmost and going clockwise, closed at flapless blue stripe. The staff is... a nightmare. Good luck.

Notes: If you've been wondering where I've been all this time, that's where. Good old MMOs, the annihilators of free time ~

Dazzling Priestess Nine-tailed Fox (Summoners War Papercraft)

Difficulty: Hard
Pages: 7
Pieces: 203
Height: 17cm
Width: 13cm
Depth: 17cm

Download (includes all five elements)

Disclaimer: I didn't make this model, it was ripped from the game. I've just edited it a little bit to make it more papercraft friendly ~

Instructions: Print page 9 at the back of page 8. Body build order is face from top to bottom, back of the head, neck, torso, sleeves, rest of the dress. Make hair starting from front, make ears separately and attach when possible. Slide hair on the head and fix it in place by gluing sidelocks and back to the head, after that make all hair accesories and put them in place. legs are built from toes to waist. Hands are especialy tricky, be carefull with them. Build tails from tips to base one by one and put them together. If you'll position them good enough your foxy will be able to stand without any additional support.

Notes: "Friend" managed to drag me back into this drug addiction falsely advertised as a mobile game. One day I'll give my girl runeset she truly deserves ~

Winged Nosk (Hollow Knight Papercraft)

Difficulty: Hard
Pages: 4
Pieces: 110
Height: 20cm
Width: 19cm
Depth: 18cm

 Download

Instructions:  Print page 6 at the back of page 2. Body is built starting from tip of the tail and closing at neck . Make legs separately and attach them when possible. When making wings glue corresponding flaps together outside and glue membrane on top of them (check picture below), attach to the main body when possible. When making body first make spike, then make corresponding ribs, then glue them together and attach whole thing to the rest of the body and then attach part of orange belly. There are some alterations to the process (legs, spike with two pair of corresponding ribs), refer to .pdo while building. Head is made starting from the top and closed at the tips of the horns (mandibles?). Enjoy your Doppelgänger Spiderbat ~

Charms Part 5 (Hollow Knight Papercraft)

Joni's Blessing
Difficulty: Hard
Pages: 1/2
Pieces: 29
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Lifeblood Core
Difficulty: Medium
Pages: 1/2
Pieces: 12
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Lifeblood Heart
Difficulty: Medium
Pages: 1/2
Pieces: 11
Height: 3cm
Width: 3cm
Depth: ~0.8cm

Unbreakable Heart
Difficulty: Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Hiveblood
Difficulty: Easy
Pages: 1/2
Pieces: 3
Height: 3cm
Width: 2.6cm
Depth: 0.5cm

Download

Instructions:
Shared: Every charm takes less than half of a page, so you can print two on the same page.
Hiveblood: Fold lines and flaps that match comb outlines.
Joni's Blessing: Build order: Base. Masks on left and right. Ornamental metallic piece with gems on bottom part. Central Mask.
Lifeblood Core: Base. Ornamental metallic piece. Side gems. Center gem.
Lifeblood Heart: Base. Lower ornamental metallic part. Gem. Top ornamental metallic part.
Unbreakable Heart: Base. Masks in pretty much any order.

Shade Lord (Hollow Knight Papercraft)

Difficulty: Hard
Pages: 17
Pieces: 445
Height: 40cm
Width: 46cm
Depth: 32cm

Download

Instructions: Now it comes with an illustrated guide inside. I'm wonderning, if it's more comprehensible than my usual gibberish ~
Notes: The moment of finally witnessing that glory... The sweetest moment of them all ~

Mini Knight (Hollow Knight Papercraft)

Difficulty: Hard
Pages: 1
Pieces: 33
Height: 7cm
Width: 3.5cm
Depth: ~3cm

Download

Instructions: Head is made starting from tips of the horns, closed at the bottom. Body is made starting from feet, closing at top. Cloak is made starting from rightmost part and going clockwise.

Charms Part 3 (Hollow Knight Papercraft)

Dream Wielder
Difficulty: Easy
Pages: 1/2
Pieces: 4
Height: 3cm
Width: 3cm
Depth: ~0.4cm

Flukenest
Difficulty: Hard
Pages: 1/2
Pieces: 7
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Soul Eater
Difficulty: Hard
Pages: 1/2
Pieces: 22
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Spell Twister
Difficulty: Hard
Pages: 1/2
Pieces: 13
Height: 3cm
Width: ~3cm
Depth: ~0.7cm

Shaman Stone
Difficulty: Hard
Pages: 1/2
Pieces: 17
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Shaman Stone (easy)
Difficulty: Easy
Pages: 1/2
Pieces: 5
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Download

Instructions:
Shared: If there is page 2, print it at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page.
Dream Wielder: I was unable to came up with a way to overcomplicate this thing.
Flukenest: Start with small black part.
Soul Eater: Make base sarting from golden ring, then attach "scales".
Spell Twister: Make base and gem. Cut out "wings" and attach them to the gem, then attach whole thing to the base. Finish with making remaining "claw" parts and putting them in place.
Shaman Stone: There are two versions: hard and easy. Comparison is shown below (easy one is on the right).

Radiance (Hollow Knight Papercraft)

Radiance

Difficulty: Hard
Pages: 6
Pieces: 193
Height: 30cm
Width: 29cm
Depth: 6.5cm

Base

Difficulty: Easy
Pages: 5
Pieces: 46
Height: 33cm
Width: ~42cm
Depth:  6cm

Download

Instructions: Start building from the crown and keep following numbers. Build face section (parts 17-20) separately and then attach whole thing to the rest of the head. Glue corresponding flaps on parts 28 and 29, 30-31 and 19-27, 32 and 33 together outside of the model. Glue fluff parts (34,35,36) on top of them. Legs are the hardest part of the model, be careful with them. Prefold all flaps on black leg parts (41,44,45,62,65,66). Tentac... I mean. wings are relatively easy to build, though connecting individual tenta... feathers together might be tricky. Parts 88, 142,143 and 193 are optional, if you think they will make putting everything together easier, go for it. When main model is made you can either just hang it by middle crown spike or build base provided. Start building each pillar from top going down. Place coin inside base of each pillar.

Notes: Somehow this Godly Moth managed to corrupt its own .pdo file, so I had to redo everything from scratch. These things are way too self aware sometimes ~

Nosk (Holow Knight Papercraft)

Nosk

Difficulty: Hard
Pages: 4
Pieces: 145
Height: 20cm
Width: 17cm
Depth:  26cm

Download

Instructions: Print page 6 at the back of page 4. Follow numbers. Body is built starting from tip of the tail (part 1) and closing at neck (128). Make legs separately and attach them when possible. When making body first make spike, then make corresponding ribs, then glue them together and attach whole thing to the rest of the body and then attach part of orange belly. There are some alterations to the process (legs, spike with two pair of corresponding ribs), refer to .pdo while building. Head is made starting from tips of the horns (mandibles?) and closed at part 143. Enjoy your Doppelgänger Spider ~

Charms Part 2 (Hollow Knight Papercraft)

Gathering Swarm
Difficulty: Hard
Pages: 1/2
Pieces: 32
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Glowing Womb
Difficulty: Easy
Pages: 1/2
Pieces: 22
Height: 3cm
Width: 3cm
Depth: ~0.8cm

Grimmchild
Difficulty: Medium
Pages: 1/2
Pieces: 14
Height: 3cm
Width: 2.5cm
Depth:  ~0.5cm

Wayward Compass
Difficulty: Medium
Pages: 1/2
Pieces: 11
Height: 3cm
Width: 3cm
Depth: ~0.7cm


Weaversong
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 14
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Weaversong (easy)
Difficulty: Easy
Pages: 1/2
Pieces: 5
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Download 

Instructions:
Shared: If there is page 2, print it at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page.
Gathering Swarm: Make base. Attach reddish parts going from bottom to top, use markings at base as guide. Shell part is made starting from small center piece and going outwards. When making fly, you can slightly fold wings and body to add some volume. Glue wings to body, the glue the whole fly to the base.
Glowing Womb: Make base. Attach "feathers" going from bottom to top ones. Make mask starting from top and going down. Slide mask on top on the base and glue it in place.
Grimmchild: Start from tips of the horns and go down. Close with the backside piece.
Wayward Compass: Prefold lines on star shaped part.
Weaversong: There are two versions: normal and easy. Easy one is just a semisphere, normal one has a crease in it and webs as separate details. Here is a comparison (easy one is on the right).

Charms part 1 (Hollow Knight Papercraft)

Void Heart
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Quick Slash
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 15
Height: ~3cm
Width: ~3cm
Depth: ~0.7cm


Soul Catcher
Difficulty: Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Mark of Pride
Difficulty: Medium-Hard
Pages: 1/2
Pieces: 13
Height: 3cm
Width: ~3cm
Depth: ~0.7cm

Unbreakable Strength
Difficulty: Hard
Pages: 1/2
Pieces: 21
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Download 


Instructions:
Shared: Print page 2 at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page. They all are prety straightforward, just follow numbers. All difficulty comes from their small size.
Void Heart: You can cut out eyeholes for a nice depth effect.
Quick Slash: Make base first, then attach "blades" layer by layer. Use image inside as reference. Easiest to build, but also easiest to mess up, so be careful.
Mark of Pride: Prefold all flaps with valley fold.
Unbreakable Strength: Prefold all flaps. Attach "claws" to the base by gluing them to the backside by black side of flaps. Backside should look like this (minus black color):

Notes: My standard charm build ~
Also, funny coincidence, that three out of five charms are made of exactly 13 pieces ~