Friday 26 April 2019

Hatchling (Hollow Knight Papercraft)

Hatchling

Difficulty: Easy
Pages: 1
Pieces: 28
Height: 7.5cm
Width: 11.5cm
Depth: 9.5cm

Download

Instructions: Head is built starting from the tips of the horns, closing at the bottom of the mask. Everything else should be pretty obvious ~

Weaverlings x3 (Hollow Knight Papercraft)

Weaverlings x3

Difficulty: Easy
Pages: 1
Pieces: 27 (9x3)
Height: 3cm + legs each
Width: 3cm + legs each
Depth:  3cm + legs each

Download 

Instructions: Print page 3 on back of page 2. They are literally spheres on legs. Start with parts that have eyes, close with part that has no flaps. Cut out and fold legs the way you like, attach them to the body. Done ~


Thursday 25 April 2019

Grimmchild (Hollow Knight papercraft)

Grimmchild

Difficulty: Easy
Pages: 2
Pieces: 30
Height: 6cm
Width: 15cm
Depth:  15cm

Download 

Instructions: Pretty easy one. Make wings. Make head starting at tips of the horns and closing at mouth. Make body starting at tip of the tail and closing at neck. Put everything together ~

Wednesday 24 April 2019

Charms Part 2 (Hollow Knight Papercraft)

Gathering Swarm
Difficulty: Hard
Pages: 1/2
Pieces: 32
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Glowing Womb
Difficulty: Easy
Pages: 1/2
Pieces: 22
Height: 3cm
Width: 3cm
Depth: ~0.8cm

Grimmchild
Difficulty: Medium
Pages: 1/2
Pieces: 14
Height: 3cm
Width: 2.5cm
Depth:  ~0.5cm

Wayward Compass
Difficulty: Medium
Pages: 1/2
Pieces: 11
Height: 3cm
Width: 3cm
Depth: ~0.7cm


Weaversong
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 14
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Weaversong (easy)
Difficulty: Easy
Pages: 1/2
Pieces: 5
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Download 

Instructions:
Shared: If there is page 2, print it at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page.
Gathering Swarm: Make base. Attach reddish parts going from bottom to top, use markings at base as guide. Shell part is made starting from small center piece and going outwards. When making fly, you can slightly fold wings and body to add some volume. Glue wings to body, the glue the whole fly to the base.
Glowing Womb: Make base. Attach "feathers" going from bottom to top ones. Make mask starting from top and going down. Slide mask on top on the base and glue it in place.
Grimmchild: Start from tips of the horns and go down. Close with the backside piece.
Wayward Compass: Prefold lines on star shaped part.
Weaversong: There are two versions: normal and easy. Easy one is just a semisphere, normal one has a crease in it and webs as separate details. Here is a comparison (easy one is on the right).



Tuesday 23 April 2019

Primal Aspid (Hollow Knight papercraft)

Primal Aspid

Difficulty: Medium
Pages: 1
Pieces: 27 (+4 for base)
Height: 9cm
Width: 10cm
Depth: 5cm


Download

Instructions: Print page 3 at the back of page 2. Follow numbers. Head is the hardest part, everything else is pretty easy. Place a small coin inside base.

Thursday 11 April 2019

Charms part 1 (Hollow Knight Papercraft)


Void Heart
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Quick Slash
Difficulty: Easy-Medium
Pages: 1/2
Pieces: 15
Height: ~3cm
Width: ~3cm
Depth: ~0.7cm


Soul Catcher
Difficulty: Medium
Pages: 1/2
Pieces: 13
Height: 3cm
Width: 3cm
Depth: ~0.7cm

Mark of Pride
Difficulty: Medium-Hard
Pages: 1/2
Pieces: 13
Height: 3cm
Width: ~3cm
Depth: ~0.7cm

Unbreakable Strength
Difficulty: Hard
Pages: 1/2
Pieces: 21
Height: 3cm
Width: 3cm
Depth: ~0.5cm

Download 


Instructions:
Shared: Print page 2 at the back of page 1. Every charm takes less than half of a page, so you can print two on the same page. They all are prety straightforward, just follow numbers. All difficulty comes from their small size.
Void Heart: You can cut out eyeholes for a nice depth effect.
Quick Slash: Make base first, then attach "blades" layer by layer. Use image inside as reference. Easiest to build, but also easiest to mess up, so be careful.
Mark of Pride: Prefold all flaps with valley fold.
Unbreakable Strength: Prefold all flaps. Attach "claws" to the base by gluing them to the backside by black side of flaps. Backside should look like this (minus black color):





Notes: My standard charm build ~
Also, funny coincidence, that three out of five charms are made of exactly 13 pieces ~