Troupe Master Grimm Papercraft (Hollow Knight)

Troupe Master Grimm

Difficulty: Medium
Pages: 2 (+3 for base)
Pieces: 30 (+14 for base)
Height: 21cm
Width: 17cm
Depth:  17cm

Download

Instructions: Print page 7 at the back of the page 3. Model is pretty straightforward, just follow numbers. When three main parts (head, body, cloak) are done, first put cloak on body without gluing it to anything yet. Then glue head to the body. Find good position for cloak and glue it in 1-2 places to head.
To build base attach pieces A and B together, then glue inner flame circle parts (C) to the flaps of part B. Glue parts D on top of parts C. Carefully cut out all flames. You can place part E inside base for some additional support. Close base with part F.

Notes: Probably, one of the best dance partners I've ever had ~

The Hollow Knight Papercraft

The Hollow Knight

Difficulty: Medium
Pages: 9
Pieces: 117
Height: 38cm
Width: 28cm
Depth: 48cm

Download

WARNING! 
Ironically, this thing is somewhat of a failure. It is barely able to stand and I'm afraid that it might crumble upon its own weight one day. It is buildable though and "should" be possible to balance out. Just requires some effort. If you still decide to give it a go, I recommend trying strengthening nail by gluing something sturdy inside (I've used actual nail) and gluing a wire and (maybe) some additional weight inside "cape". Good luck ~

Instructions: Print page 11 at the back of page 4. Build head starting from the tips of the horns and going down, close at "mouth". Build legs from top and down and arm from fingertips and up. Build body starting from bottom and going up, attach limbs when possible. Cloak is built from narrowest to widest part. Assemble head, cloak and body first. Then attach nail and "cape" (pages 9-10 part), try to find good enough position for them to prevent model from falling. Again, good luck ~

Broken Vessel Papercraft (Hollow Knight)

Broken Vessel

Difficulty: Medium
Pages: 4
Pieces: 49
Height: 20cm
Width: 16cm
Depth: 16cm

Download 

Insctructions: Follow numbers. Model is composed of three parts: head, body and nail. Build them separately and then assemble everything together. After finishing horns (15-19, 20-26), glue them to the parts 27-28 and only then glue the whole thing to the rest of the head. When building nail, don't cut a hole in a piece 48, use it as an indication where to attach handle (piece 49). In the end glue a small coin inside bottom front part of the cloak as shown in pictue below.

Hornet Papercraft (Hollow Knight)

Hornet

Difficulty: Medium
Pages: 3
Pieces: 44
Height: 15cm
Width: 12.8cm
Depth: 10.6cm

Download

Instructions: Git Gud. Print page 5 at the back of page 3. Follow numbers. Model is composed of several parts: head, body, arms (x2), legs (x2) and tablet with the words of wisdom written on it. Build them separately and then assemble everything together. While building cloak make sure to prefold creases (marked with red fold lines in the .pdo file). When attaching part 25 to the rest of the body, glue red flaps together with corresponding flaps from parts 23-24 outside of the model, then glue part 26 on top of them. Glue hands to the tablet first, then attach the whole thing to body. Legs can be placed in either crosslegged position (as shown in photo) or closer to her actual sitting sprite (as in .pdo file). Head and limbs can be attached before or after closing main body part.

Notes: My mentor, totem and spirit animal. Probably the only reason why I ever was able to beat Pantheon of Hallownest. Though now she is whispering that I have to finish radiant bosses and all pantheons with all bindings, so be careful with that power ~

The Knight Papercraft (Hollow Knight)

The Knight

Difficulty: Easy
Pages: 2 (+1 for base)
Pieces: 44 (+3 for base)
Height: 15cm
Width: 8.1cm
Depth: 5.7cm

Download

Instructions: Follow numbers. Model is composed of four parts (+base): head, cloak, body, nail. Build them separately and then assemble everything together. When building nail, don't cut a hole in a piece 34, use it as an indication where to attach handle (piece 35).

Notes: The Knight, Wanderer, Little Ghost, Little Shadow... So many names, yet no name... Truly, the most intriguing wonder of Hallownest ~

Sharkdog Papercraft

Sharkdog Papercraft

Difficulty: Easy 
Pages: 1 
Pieces: 24 
Height: 7.4cm
Width: 3.2cm
Depth: 10.7cm

Download

Instructions: Pretty easy model, just follow the numbers.